#Diy antenna booster tv

If 3G is enabled in your area, do not give up on low signals and try replacing the position of the antenna to get maximum reception.Ĭhanging the turns of the uninsulated coaxial cable with both outdoor and indoor antenna units would enhance the signal strength after the area is determined with maximum signals. Keep in mind that instead of having a high but fluctuating signal, it is better to have a low signal which is strong. While the mounting process, you need to keep in check the signals. As the antenna is now ready, we would mount this antenna over the 3G antenna. With the help of a screwdriver, we would now make the turns from the center core of the metallic wire. At one end of the coaxial cable, we would cut off the insulator to make it a core for the antenna. Attach this twisted metallic sheet with the connector box and form a U-shaped loop. Now we need to attach the connections of the metallic sheet. These turns determine the diameter of the wire. We will make twists and turns over this uninsulated portion of the wire. This is done to establish connection points with the bare wires. We will remain uninsulated the coaxial cable at about 15 to 25 cm in length.

#Diy antenna booster tv

Now we would work with the coaxial cable or a TV cable. You can make a metallic stand as a base or use the common clothes stand as the base of the antenna. We would also need a base for this antenna. You would cut the wire into two equal haves, one of which would go out for outdoor antenna connection.Ī wire cutter is required for this purpose. At the interior side of the connector box, all the wires are attached. At the other corner of the coat hanger, make the bend of about 45 degrees. Repeat the same process over the other side. Then create another bend of 90 degrees at a distance of about 9 cm. From the bend of 45 degrees, make another bend of 90 degrees at a distance of 8cm. Take one end of the coat hanger and bent it at an angle of 45 degrees. Usually, there is a coating over the hanger you can remove it if you want or use the coat hanger directly. So all you need is a screwdriver, a coaxial cable, a wire cutter, and an iron cable, maybe an iron coat hanger. The antenna construction processĪ cell phone coverage is essential in your area for the proper working of this antenna as it only captures the signals, not creates them. Both of them work the best for proper reception of signals of both 3G, 4G, and even 2G for some cases. There are two basic components of this antenna one is outdoor, and the other is indoor.

There are a few easy steps by which you can create a perfect antenna with some simple things and can boost your cell phone signals. For proper signal reception, you can try making an antenna. It is quite a frustrating situation and needs to be solved quickly. So, cell phone users do not face difficulties in signal reception and can talk freely and access the internet easily on their phones.īut for people who live in rural areas away from the signal reception towers face difficulty in accessing the phone sources. In urban areas, where the signal transmission source is near, the issues of signal distortion and signal drop are less.